Davin DV-101A Manuel page 9

NON-STANDARD
For example, if you wish to water every 1 minute and 30 seconds, this is not possible via the standard
settings. To program a 'Non-standard' time setting on the DV-101A you can consult the tables below.
'DIP-switch' 4 is ALWAYS on:
DIP-switch Max.
setting time
15 sec.
60 sec.
7.5 min. 0 sec.
60 min.
To water every 1 minute and 30 seconds:
• The 'DIP-switch' setting has to be put on 7,5 min.
• And the switch has to be turned to ± 12.
• Almost every possible setting can be found in the table above, almost always via the 'DIP-switch'
setting 7,5 min.
ScALE MARKING
15 sec
60 sec
7,5 min.
60 min.
(Normally the 60 min. setting is never used for our purposes, when in doubt please call the helpdesk.)
DV-101A Binnenwerk PMS.indd 9
Manual DV‑101A
0 10 20
0 sec. 2½ sec. 5 sec.
0 sec. 10 sec. 20 sec.
75 sec. 150 sec.
1:15 min. 2:30 min.
0 sec. 10 min. 20 min.
MAx. NuMbER Of
SEcOND
15
60
450
3600
SwITch SETTING
30 40
7½ sec. 10 sec.
30 sec. 40 sec.
225 sec. 300 sec.
3:45 min. 5 min.
30 min. 40 min.
EvERy STRIPE ON ThE
cLOcK =
0.25 sec.
1 sec.
7.5 sec.
60 sec.
50 60
12½ sec. 15 sec.
50 sec. 60 sec.
375 sec. 450 sec.
6:15 min. 7:30 min
50 min. 60 min.
DIP-SwITch MODE
23-3-2012 2:43:11
11