Davin DV-101A Manuel page 11

1.8 ThE fuSE Of ThE Dv-101A
The DV-101A has a 6 Amp thermal fuse.
This fuse turns off the DV-101A automatically in
case of an overload and / or short-circuits.
When the thermal fuse has turned off the
DV101A (during an overload and / or short)
the DV-101A can be reset.
Resetting the DV-101A
• Resolve the problem that caused the thermal
fuse to be activated.
• At the bottom of the DV-101A you will see the
thermal fuse with the label 'Circuit Breaker -
Press to RESET'.
• Press this button to reset the DV-101A.
• The DV-101A is now working again.
DV-101A Binnenwerk PMS.indd 11
Manual DV‑101A
• The correct operation of the DV-101A is only
• Although it is possible to install the DV-101A
• Before installing the DV-101A , the 230 v.
• This guide is only to be used for the DV-101A.
• DAVIN products are covered by a 1-year war-
• To qualify for this warranty, you are required
• If changes are made to DAVIN products
• The DAVIN warranty will also become void
• Neither the manufacturer, nor the importer,
1.9 fOR yOuR SAfETy.
guaranteed, if you observe this manual.
yourself, we recommend to have this done by
a certified installer.
voltage MUST be taken off the power point
(Check this with a multi-meter or a Volt
Stick!)
ranty.
to return the DV-101A to the point of sale.
without the express and written prior permis-
sion of the manufacturer, the warranty will
become void.
with improper installation of the DV-101A.
nor the retailers of the DV-101A are liable for
damages arising from the use of the
DV-101A.
SERVICE NUMBER / HELPDESK:
+31 (0)6 – 14 813 447
13
23-3-2012 2:43:12