HURAKAN HKN-TOP3 Mode D'emploi page 8

EN
HELLO!
Thank you for choosing our product.
This device is infrared electric thermal equipment and is made of high-quality stainless steel.
This newest model has a long service life. The toaster can be used both at home and in cafes,
canteens, etc.
SAFETY INSTRUCTIONS
ATTENTION!
Read this instruction manual carefully before using the toaster. During operation, the
instruction manual must be stored together with other instructions and manuals in a safe place
accessible to personnel. To avoid personal injury and equipment damage, all of the following
requirements and rules must be strictly adhered to.
⚫
Do not make any changes to the toaster design or structure.
⚫
Do not wash the toaster under running water or immerse it in water.
⚫
Before using the toaster for the first time, unpack it, remove the packaging materials and
protective films, and wash it thoroughly according to the cleaning instructions below.
PLACEMENT AND INSTALLATION
⚫
The mains supply voltage must comply with the requirements indicated on the toaster
nameplate.
⚫
The toaster must be installed on a flat horizontal surface capable of supporting its weight.
⚫
The toaster must not obstruct the passage of people or access to other equipment.
⚫
Do not use the toaster outdoors.
⚫
The surface on which the toaster is installed must be heat-resistant (e.g. stainless steel or
special heat-resistant plastic).
⚫
Personnel should be aware that the external surfaces of the toaster heat up during use.
⚫
The toaster must be installed in a well-ventilated room and protected from high
temperatures and contamination.
⚫
It is necessary to provide space for air to flow at the front and back of the toaster.
⚫
The toaster must not be located in the airflow path of the air conditioning system.
⚫
For safety reasons, the control knobs of the toaster and the power cord plug must always
be within reach.
⚫
Before installing the crumb tray or loading tray, the toaster must be disconnected from the
mains and allowed to cool.
⚫
The horizontal position of the toaster is controlled by the height-adjustable legs.
⚫
The crumb tray must be installed before using the toaster.
TOASTER OPERATION
⚫
Plug the power cord into an electrical outlet and turn on the toaster.
⚫
Set the switch to the "Bread" position. The corresponding indicator lights up.
8
INTRODUCTION