Publicité
Les langues disponibles
Les langues disponibles
CHARGING
•
With the appliance shut off, connect the power adapter to a wall
outlet and insert the other end into the charging slot of the Robot
Vacuum, as shown below.
•
If the Robot Vacuum has a low charge, the power button will start
flashing red.
•
During the charging process the power button will flash green.
•
When the product is fully charged the power button will stay green.
•
When charging the appliance for the first time, please make sure to
do so for at least 6 hours.
•
If you disconnect the power adapter when the product is turned on
and charged, the power button will begin flashing red and green to
remind you that the power switch is not turned off. If you will not be
using the Robot Vacuum, please remember to turn the switch off.
•
Please charge the appliance fully after every use.
USING THE APPLIANCE
•
Turn on the main power switch on the bottom of the Robot
Vacuum. See below for reference.
www.KALORIK.com
7
RVC 46588 - 200501
Publicité
