Setting Your Location; Manually Entering A S.a.m.e County Code - Midland WR400 Manuel Du Propriétaire

WR400 Owner's Manual

Setting Your Location

1. Press the MENU button.
Press the ▲ or ▼ arrows until the display says SET LOCATION, then
2.
press ENTER.
You now have the option of choosing between ANY, MULTIPLE, and
3.
SINGLE using the ▲ or ▼ arrows, then press ENTER.
4. If ANY is selected your radio will receive all weather alerts and you will be
unable to select a specific county. Press the MENU button to save your
settings and exit the menu.
If MULTIPLE or SINGLE were selected then you will be asked to input
5.
your specific location and the display will show 01 EMPTY. Press ENTER
to input your country. Press the ▲ or ▼ arrows to scroll to your selection
then press ENTER. You will now be asked for your state. Press the ▲
or ▼arrows to scroll to your selection then press ENTER. You will now
have a list of counties to choose from. Press the ▲ or ▼ arrows to scroll
to your selection then press ENTER. If you selected SINGLE for your
location press the MENU button to save your settings and exit the menu.
If you selected MULTIPLE for your location you will be taken to the next
6.
county entry 02 EMPTY. Press the ENTER button. You now have the
option of selecting NEARBY. This gives you the option of having the
radio automatically populate your selected county entry with the next
closest county code. If you want to manually enter your county, press the
▲ or ▼ arrows to select your country and repeat the steps necessary for
selecting your county, the press MENU.
Manually Entering a S.A.M.E. County Code
Press the MENU button.
1.
Press the ▲ or ▼ arrows until the display says SET LOCATION, then
2.
press ENTER.
3. You now have the option of choosing between ANY, MULTIPLE, and
SINGLE. If you want to program a single county code then select
SINGLE. If you want to program multiple county codes then select
MULTIPLE.
all weather alerts and you will be unable to program a specific county
code. Press ▲ or ▼ until you have reached your selection then press
ENTER.
4. Press ► and you will now be able to input your 6 digit S.A.M.E. code.
Press ▲ or ▼ to change the digit that is flashing on the screen. Press ►
to go to the next digit to the right, then press ENTER.
If you selected SINGLE for your location press the MENU button 3 times
5.
to save your settings and exit the menu. If you selected MULTIPLE for
your location you can now enter more S.A.M.E. codes.
6. Press the▲ arrow to go to the next county code programming location
and press the ► arrow. Repeat the steps for programming your 6 digit
S.A.M.E code.
7. When you are done manually entering your S.A.M.E. county codes press
the MENU button 4 times to save your settings and exit the menu.
page 5
If ANY is selected as your location your radio will receive
midlandusa.com