Kobalt KHB 6380-06 Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS
BATTERY
a. To install the battery:
• Align the battery with the cavity in the handle
housing on the blower (A).
• Grasp the handle (H) firmly.
• Insert the battery in the opening until the battery
release button (I) locks into place. You should hear
a "click" once it is installed.
b. To remove the battery:
• Press and hold the battery release button (I) with
firm grip.
• Grasp the trigger handle firmly. Pull the battery
pack out of the handle.
Note: The battery fits into the handle snugly in
order to prevent accidental dislodging. It may
require a strong pull to remove it.
OPERATION INSTRUCTIONS
1. STARTING/STOPPING THE BLOWER
• Squeeze the trigger (J) to start the blower.
• To change speed, squeeze the trigger to increase
the speed and release the trigger slightly to
decrease the speed.
• Release the trigger completely to stop the blower.
2
A
1
9
I
H
J