NSK S-Max pico Mode D'emploi page 5

Model
Consumption Current
Use Environment
Transportation and Storage Environment
Within this Operation Manual, Model will be written down as follows.
S-Max pico = pico, S-Max pico KL = pico KL, S-Max pico SL = pico SL, S-Max pico BLED = pico BLED, S-Max pico WLED = pico WLED
KaVo and MULTIflex are registered trademarks of Kaltenbach & Voigt GmbH & Co., Germany. (pico KL) / Sirona
® ®
W&H and Roto Quick are registered trademarks of W&H Dentalwerk Bürmoos GmbH, Austria. (pico WLED) / Bien-Air
® ®
2. Insertion & Removal of the bur
CAUTION
· Do not use any bur longer than recommended by NSK in Specification.
· Do not use bent, worn, damaged, or non-concentric burs. Such burs can cause damage to the handpiece.
· Do not exceed the bur speed recommended by the bur manufacturer.
· Always keep the bur shank clean. Entry of hard debris into the chuck via the bur shank could cause rotation slip and also prevent the bur from
being securely located in the chuck.
pico
-
Temperature : 0 – 40 ˚C, Humidity : 30 - 75% HR, Atmospheric Pressure : 700 - 1,060hPa
Temperature : -10 – 50 ˚C, Humidity : 10 - 85% RH, Atmospheric Pressure : 500 - 1,060hPa
is a registered trademark of Sirona Dental Systems GmbH, Germany. (pico SL)
®
and Unifix
®
pico KL / pico SL
are registered trademarks of Bien-Air Dental S.A.,Switzerland. (pico BLED)
®
pico BLED / pico WLED
0.38 Typical (3.3V)
3