NSK S-Max pico Mode D'emploi page 4

· Use a power source which meets the following requirements (pico BLED, pico WLED).
1. The electricity supply of the power source is below 15W both under normal and single-failure conditions.
2. The power source uses a SELV circuit for electricity supply.
3. The output voltage of the power source is within the range recommended by the manufacturer of this product.
1. Specification
Model
Head Type
Rotation Speed
Spray Type
Chuck Type
Bur
Bur Length
Maximum Bur Diameter
Air Supply
Air Consumption
Head Dimension x Height
Optic
Voltage
2
Activate Voltage
pico
ISO1797-1 Type3 Ø1.59~1.60mm Short Shank Bur/Super Short Shank Bur
Max. Bur length: 18.5 mm
0.20MPa (2.0 kgf/cm 2 )~0.25MPa (2.5 kgf/cm 2
Glass Rod
pico KL / pico SL
Miniature
380,000 ~ 450,000 min
-1
Single Spray
Push Button Chuck
Bur fixing Length: 8.0 mm
Ø 2.0 mm
0.25MPa (2.5 kgf/cm
)
45 ± 5 NL/min
Ø 8.6 mm x 9.0 mm
-
-
pico BLED / pico WLED
)~0.30MPa (3.0 kgf/cm )
2 2
White LED
AC/DC 3.3 ± 0.05 V
3.0 - 4.0 V