NSK S-Max pico Mode D'emploi page 3

Intended to Use: This handpiece is designed only for dental treatment use.
CAUTION
· When operating the handpiece always consider the safety of the patient.
· Do not exceed maximum bur length.
· Check for vibration, noise and overheating outside the patient's oral cavity before use. If any abnormalities are found, stop using the Product immediately and contact
authorized dealer.
· Should the handpiece function abnormally, cease operation immediately and return the handpiece to an dealer for repair.
· Depressing the Push-Button while the handpiece is rotating will result in OVERHEATING of the handpiece head. Special caution must be exercised during use to keep
cheek tissue AWAY from the Push-Button of the handpiece. Contact with cheek tissue may cause the Push-Button to depress and burn injury to the patient may occur.
· Do not exceed the Air Pressure recommended in specification below as bur breakage or wear may occur if it exceeds the Air Pressure.
· Do not allow any impact on to the handpiece . Do not drop the handpiece.
· Refer to the coupling manual before connecting it to the handpiece tubing.
· Do not attempt to disassemble the handpiece or tamper with the mechanism.
· NSK has not recommended the repair and disassembly of the cartridge without exception. Handpiece may perform abnormally (abnormal noise or abnormal vibration).
Damage, failure or accidents are outside of our guarantee.
· Avoid continual eye contact with the LED light (pico BLED, pico WLED).
· If any abnormalities ( dark, do not light on or flashing ) are found for LED, stop using the product immediately and contact authorized dealer. ( pico BLED, pico WLED )
· This handpiece is a LED product classified in the "Exempt Group" (no photobiological hazard) in accordance with IEC62471/EN62471 (pico BLED, pico WLED).
1