Télécharger Imprimer la page

Perles PB 1223 Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Übermäßige Funken weisen im allgemeinen auf das
Vorhandensein von Schmutz im Motor oder auf einen
anomalen Kohleverschleiß hin.
Achten Sie besonders darauf, daß die Belüftungsein-
und Ausgänge von Schmutz befreit sind. Die
Reinigung mit einer sanften Bürste und einem
anschließenden komprimierten Luftstrahl wird in den
meisten Fällen genügen, um eine ausreichende
interne Belüftung der Maschine zu gewährleisten.
WARTUNG UND REPARATUR
Im Falle eines benötigten Services wenden Sie sich an
eine
unserer
Servicedienststellen.
Selbsteingreifen in die Maschine ist verboten und
gefährlich.
!
Die
Reparaturen
Facharbeitern.
Im Falle, dass Sie die entsprechenden Reserveteile in
unseren Geschäften kaufen müssen, wenden Sie sich an
unsere Servicestellen, damit wir sie Ihnen einbauen. Im
Fall der Nichtberüchtsichtigung der Anleitungen für den
Gebrauch und der Anleitungen für den Service und die
Reparatur, sieht sich die Firma nicht verantwortlich für
den entstandenen Schaden an der Person oder dem
Vermögen,
der
Benutzer
Garantierechte.
!
Jede Reparatur des Geräts bei nicht autorisierten
Servicen erfolgt auf eigene Verantwortung.
!
Für die Eingriffe bei nicht autorisierten Servicen
ist der Besitzer des Geräts selber verantwortlich
und verliert alle Garantierechte.
HANDELN MIT ABFÄLLEN UND
UMWELTSCHUTZ
Elektrowerkzeuge, Zubehör und Verpackungen
sollen einer umweltgerechten Wiederverwertung
zugeführt werden.
Nur für EU-Länder:
!
Werfen Sie Elektrowerkzeuge nicht in den
Hausmüll!
Gemäß der Europäischen Richtlinie 2002/96/EG
über Elektro- und Elektronik- Altgeräte und ihrer
Umsetzung in nationales Recht müssen nicht
mehr
gebrauchsfähige
getrennt gesammelt und einer umweltgerechten
Wiederverwertung zugeführt werden
Jegliches
überlassen
Sie
unseren
verliert
ebenso
Elektrowerkzeuge
GENERAL SAFETY
INSTRUCTIONS
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated
(corded) power tool.
SAVE THESE INSTRUCTIONS.
1) WORK AREA
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do
not
atmospheres,
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep
children
operating a power tool. Distractions can cause you
to lose control.
2) ELECTRICAL SAFETY
die
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in
the off position before plugging in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
6
operate
power
tools
such
as
in
the
and
bystanders
in
explosive
presence
of
away
while

Publicité

loading

Ce manuel est également adapté pour:

Pb 1232