Publicité
Les langues disponibles
Les langues disponibles
HTC T5
Select unit from list and press OK. A
message appears saying that the units are
paired.
The communication between the dust
extractor and the grinder is now ready. You
can now control start/stop and filter cleaning
with the buttons on your grinder.
Symbol
Description
The dust extractor is linked but not started
The dust extractor is linked and started
The dust extractor shows a warning on its display.
The dust extractor shows an error message on its display.
On the grinder's display, you can now see flow, negative pressure or filter status. You can
choose between them by using the left arrow button. If the machine is equipped with remote
control, the information is also available here. May need updating the software in the remote
control. Contact your retailer or service.
If there should be any problem with the communication, or if it is not possible to pair the units,
there may be something interfering with the frequency you are using. Try with a different
channel.
42
Grinding
D004753, 01.01
Publicité
