Scheppach HC550TC 230V Traduction Des Instructions D'origine page 20

Explanation of the symbols on the device
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the
accompanying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot
replace proper accident prevention measures.
Warning - read the instruction manual to reduce the risk of injury.
Wear hearing protection. Excessive noise can result in a loss of hearing.
Wear a dust protection mask. When machining wood and other materials, harmful dust may
be generated. Do not machine material containing asbestos!
Wear eye protection. Sparks created during work or fragments, chippings and dust ejected
by the device can case sight loss.
Warning - Hot surfaces!
Warning against electrical voltage
Warning! The device is equipped with an automated start-up control. Keep third-parties away
from the working range of the device!
Do not expose the machine to rain. The device may only be stationed, stored and operated in
dry ambient conditions.
Sound power level specified in dB
m Attention!
We have marked points in this operating manual that impact your safety with this symbol
Attention! Prior to initial commissioning, check the oil level and replace the oil sealing plug!
20 | GB www.scheppach.com