Using The Installation Instructions; Installing The Appliance; Transporting - Siemens iQ500 KG57NAI50I Notice De Montage

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

F r e e - s t a n d i n g a p p l i a n c e
enTable of Contentse n I n s t a l l a t i o n i n s t r u c t i o n s
Using the installation
instructions
Please fold out the illustrated last page.
These installation instructions refer to
several models.
The diagrams may differ.

Installing the appliance

A dry, well ventilated room is suitable as
an installation location. The installation
location should not be exposed to direct
sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If
installation next to a heat source is
unavoidable, use a suitable insulating
plate or observe the following minimum
distances from the heat source:
3 cm to electric or gas cookers.
30 cm to an oil or coal-fired cooker.
The floor of the installation location must
not give way; if required, reinforce floor.
The appliance must be upright.
All manuals and user guides at all-guides.com
Distance from wall
When installing the appliance, ensure
that the door can be opened by 90°.

Transporting

The appliance can be pushed. To do
this, the height-adjustable feet
at the front of the appliance must be
completely screwed in.
en
3

Publicité

Table des Matières
loading

Table des Matières