Publicité
Les langues disponibles
Les langues disponibles
FIGURE 11
5) With the assistance of another person, lift the hood
into the prepared cut out in the cabinet. The top
mounting brackets should rest on the countertop.
(FIGURE 11)
6) Secure the hood to the countertop with two screws.
If possible, install the angle brackets underneath the
countertop for additional support. First, loosely screw
the brackets into the sliding nuts in the housing and
push them up under the countertop.
Pre-drill the mounting holes into the countertop from
underneath. Use screws of the proper length.
(FIGURE 12)
FIGURE 12
PRODUCT INSTALLATION
7) (See FIGURE 13) Level and align the
hood in the cabinet. Push the bottom
mounting bracket on each side down
against the cabinet floor. Mark the top
edge of the mounting bracket on the
housing and the mounting holes on the
cabinet floor.
FIGURE 13
Version 6/12 - Page 11
Publicité
