Charging The Ba Ery - Gallagher TW-1 Guide De Démarrage

SPECIFICATIONS
Opera ng Temperature
Environmental Protec on Ra ng
Input Voltage
Es mated ba ery run me
CHARGING THE BATTERY
To ensure op mum performance of the TW- , the internal ba ery may need to be
charged for up to 16 hours before fi rst me use.
Important: If the TW- is to be stored for an extended period, this should be
in a cool dry place with a fully charged ba ery.
1. Connect the power adapter at the base of the unit and plug the TW- into a
power outlet and switch ON.
The charging icon will display on the screen.
2. When the charge shows 100% the TW- is ready to use with or without the
power adapter.
Note:
• When the TW- is in use, the ba ery icon
will display and show remaining charge.
• When using the scale and the charge level
falls below 10% the ba ery icon will fl ash
with a red outline. You will have about 30
minutes to complete the weighing session before the TW- must be charged.
• When the charge level becomes cri cal the unit will shut down.
• To check remaining run me at current se ngs, from the Home screen, go to
Se ngs
2
Gallagher TW- Weigh Scale Quick Start Guide
> About > Ba ery
-20 o to 50 o C
o o
-5 to 120 F
IP67
12 V DC
16 hours at 60% brightness
12 hours at 100% brightness
.