Care & Maintenance - Hornbach FAN 2.0 100 Traduction De La Notice Originale

6
GB
A
7
122
B
C
8
6
Assembly
1. Attach the junction box lid A with
its screw.
2. Attach the cover B to the device
while holding the antimosquito
screen in place.
3. Tighten the screw C on the bot-
tom of the cover.
7
Switch on the circuit breaker
8
Care & maintenance
Disconnect the fan from
power mains prior to any
operations on the device.
Always check the integrity of the
device.
1. Remove the screw C on the bot-
tom of the cover.
2. Remove the cover B from the de-
vice.
3. Clean the cover with a damp, soft
and lint free cloth.
4. Use a soft clean brush to clean
the impeller.
5. Attach the cover B to the device
while holding the antimosquito
screen in place.
6. Tighten the screw C on the bot-
tom of the cover.
7. Switch on the circuit breaker.
Do not immerse the cover in water.
GB
123