Tubs With Single-Control Mixer Tap And Extractable Showerhead - Jacuzzi Opalia Serie Utilisation Et Entretien

Showerhead
Tubs with single-con-
trol mixer tap
and extractable showerhead
The diverter valve will click when the
mixer is closed and automatically
return to the "tub filling" position.
To remove the showerhead from its support, press the ring downwards (1) and turn it
by approximately 45° (2).
For this purpose, reposition the showerhead, press the ring and turn it by approxi-
mately 45°, until it snaps upwards (closing of the seal on the flexible hose).
3
1
45°
2
Various Jacuzzi® whirlpool tub models fit a single-control mixer tap provided with au-
tomatic button diverter valve (1) and showerhead (2) with flexible hose concealed under
the tub.
To fill the tub, lift the lever of the single-control mixer tap (3); turn the mixer lever to
adjust the required temperature.
The tub spout is arranged again on the tub rim but separately from the taps. The spout
is provided with an exclusive water sheet jet.
3
1
For using the showerhead, proceed as above and press the automatic diverter valve
button (1): the water sheet will be interrupted and water will start flowing from the show-
erhead.
To remove the showerhead from its support, press the ring downwards (1) and turn it
by approximately 45° (2).
For this purpose, reposition the showerhead, press the ring and turn it by approxi-
mately 45°, until it snaps upwards (closing of the seal on the flexible hose).
2
1
30
2
1
2
45 °