Connecting Your Mouse - Belkin F8E800 Serie Guide D'utilisation

1
1
2
3
4
5
4802ea_F8E800_series.indb 4
About Your Mouse

1.3 Connecting Your Mouse

a.) Locate the computer's PS/2 mouse port or
USB port on the back of your computer.
b.) Plug your mouse into the appropriate port
suggested in section 1.2. Check the box in
which your mouse was shipped to verify the
ports that are supported with your mouse.
c.) Turn your computer on. If you're using a
PS/2 connection, your mouse will work with
the Microsoft drivers built into the operating
system. If you are connecting through USB,
your system may start a new hardware wizard.
If so, use your tab key to select "Next" on the
screens that pop up to complete the install.
Note:
It may ask for your Windows CD to
complete the install.
d.) To use the extra features of your middle
button, you must install the software,
(at, www.belkin.com/support)
Note:
The software is not required for the mouse to
work. It will work with the built-in drivers supplied by the
Windows 98, Me, 2000, and XP operating systems.
4
25/11/05 8:59:11 am