ASROCK K8N68PV-GLAN Manuel page 9

2 . 1 2 . 1 2 . 1 CPU Installation CPU Installation CPU Installation
2 . 1 2 . 1 CPU Installation CPU Installation
Step 1. Unlock the socket by lifting the lever up to a 90
Step 2. Position the CPU directly above the socket such that the CPU corner with
the golden triangle matches the socket corner with a small triangle.
Step 3. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to avoid bending of the pins.
Step 4. When the CPU is in place, press it firmly on the socket while you push
down the socket lever to secure the CPU. The lever clicks on the side tab
to indicate that it is locked.
Lever 90° Up
STEP 1:
Lift Up The Socket Lever
2 . 2 2 . 2 2 . 2 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink
2 . 2 2 . 2 Installation of CPU Fan and Heatsink
After you install the CPU into this motherboard, it is necessary to install a
larger heatsink and cooling fan to dissipate heat. You also need to spray
thermal grease between the CPU and the heatsink to improve heat dissipation.
Make sure that the CPU and the heatsink are securely fastened and in good
contact with each other. Then connect the CPU fan to the CPU FAN connec-
tor (CPU_FAN1, see Page 2, No. 7). For proper installation, please kindly
refer to the instruction manuals of the CPU fan and the heatsink.
ASRock
o
angle.
Socket Corner Small Triangle
CPU Golden Triangle
STEP 2 / STEP 3:
Match The CPU Golden Triangle
To The Socket Corner Small
Triangle
K8N68PV-GLAN Motherboard
STEP 4:
Push Down And Lock
The Socket Lever
9 9 9 9 9