Machine Set-Up; Positioning The Antenna And Foam Pads - ELNA 683 Manuel D'instructions

SECTION II

Machine Set-up

Positioning the Antenna
and Foam Pads
Insert antenna into spool pin base. Pull
the antenna pole to its highest position
and turn slightly to align.
Remove the spool holders and place
the foam pads. The foam pads help
stabilize the thread spools.
Both domestic and industrial type
thread spools can be used.
Industrial type spools
1
Use the spool holders. Make sure that
the spools touch the bottom.
Domestic type spools
2
Remove spool holders and use spool
caps.
Decorative type spools (Specialty
3
threads)
Remove spool holders and place spool
directly on the foam pad to prevent the
thread from slipping underneath the
spool.
16