Instructions For Cleaning; Reminders For Cleaning - Gastro M 70/40 GRACQE Serie Installation-Emploi-Entretien

- Inspect the appliance thoroughly before using it
again.
- Allow electric appliances to operate at the lowest
temperature for at least 60 minutes.

INSTRUCTIONS FOR CLEANING

IV.
15.

REMINDERS FOR CLEANING

READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR INJURY
RESULTING FROM FAILURE TO
OBSERVING THE FOLLOWING RULES.
DISCONNECT THE APPLIANCE ELECTRIC
SUPPLY, IF PRESENT, BEFORE CARRYING
OUT ANY OPERATION.
- Clean the satin finish stainless steel exterior
surfaces, the cooking wells and the surface of the
hotplates every day.
- At least twice a year, have an authorized technician
clean the internal parts of the appliance.
- Do not use corrosive products to clean the floor
beneath the appliance.
- Do not use direct or high pressure water jets to
clean the appliance.
SATIN FINISH STAINLESS STEEL SURFACES
- Clean the surfaces with a cloth or sponge using
water and proprietary non-abrasive detergents.
Follow the direction of the satin finish lines. Rinse
repeatedly and dry thoroughly.
- Do not use pan scourers or other iron items.
- Do not use chemical products containing chlorine.
- Do not use sharp objects which might scratch and
damage the surfaces.
COLLECTION TRAYS
- Clean the surface, removing grease, oil, food
residue etc.. .
GAS GRILL
Cleanind the burner and brazier grille
IMPORTANT: BEFORE CARRYING OUT
ANY CLEANING OPERATIONS, MAKE
SURE THE GRILLES ARE COLD.
- Lift up and remove the cooking grille and the
splashguard.
- Remove the tiles.
- Proceed to clean the burner around the fl ame zone
and along the flame protector apertures, removing
all traces of dust and burnt-on residue whilst taking
care not to enlarge the flame apertures.
- Using a scraper, clean the fi ns of the combustion
chamber that convey cooking juices into the
collection drawer and then wipe with a damp cloth.
- Take care not to damage the pilot ignition unit.
- Refit the tile, taking care to insert the front pins in
their seats.
GAS LAVA STONE GRILL
IMPORTANT: BEFORE CARRYING OUT
ANY CLEANING OPERATIONS, MAKE
SURE THE GRILLES ARE COLD.
- Lift up and remove the cooking grille and the brazier
containing the lava stone.
- Proceed to clean the burner around the fl ame zone
and along the flame protector apertures, removing
all traces of dust and burnt-on residue whilst taking
care not to enlarge the flame apertures.
ELECTRIC GRILL
IMPORTANT: BEFORE CARRYING OUT
ANY CLEANING OPERATIONS, MAKE
SURE THE HEATING ELEMENTS ARE
COLD.
- Disconnect the appliance from the power supply.
- Remove the grille and splashguard.
- Clean the inside of the grill with a scraper.
IMPORTANT: DO NOT CLEAN THE
ELEMENTS AND DO NOT USE WATER
INSIDE THE GRILL SINCE THE APPLIANCE
CONTAINS ELECTRICAL COMPONENTS.
23