inventiv 202101 Instructions D'origine page 17

You must read operating instructions before using the tool. Keep operating instructions
with the tool. Keep operating instructions with the hammer, so that they may be referred to,
if necessary.
1. TECHNICAL DATA
Type PSJ750G2 (PSJ-designation of machinery, representative of Jig Saw)
Voltage
Power input
No load speed
Stroke length
Bevel capacity
Cutting capacity
Protection Class
Machine Weight
NOISE INFORMATION
A weighted sound pressure
K = 3 dB(A)
pA
A weighted sound power
K = 3 dB(A)
wA
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
cutting boards
cutting steel metal
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
202101 750W JIG SAW WITH LASER GUIDE
L = 87.5 dB(A)
pA
L = 98.5 dB(A)
wA
Vibration emission value a
Uncertainty K = 1.5 m/s²
Vibration emission value a
Uncertainty K = 1.5 m/s²
SAFETY AND OPERATING MANUAL
230-240V~50Hz
750W
0-3000/min
20mm
±45°
Wood 80mm
Aluminum 20mm
Steel 10mm
/II
2.4kg
= 9.536 m/s
h,B
= 10.252 m/s
h,M
17
2
2