Télécharger Imprimer la page

Listo CHC L4 Notice D'utilisation page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ASSEMBLY
1.
Unpack the radiator and accessories.
2.
Turn the radiator over.
3.
Attach the feet under the base by inserting the screws
on the inside of the feet.
4.
Tighten the screws.
5.
Straighten up the radiator.
USE
s
afety Precautions
1.
Before using this appliance, please make sure it is placed on a flat and stable
surface.
2.
Place the radiator at least 1 m away from the wall, furniture and curtains.
3.
Check that the appliance's voltage matches the mains voltage (230 V~ 50 Hz wall
socket).
4.
Allow the radiator to cool down before moving it, and use the handles to carry it.
u
se
1.
Check that the power switches are in position "0" (to the right, lights off) and the
thermostat knob is in "MIN" position.
2.
Plug the radiator into a wall socket.
3.
Turn on the radiator in one of the following positions:
- Press the switch (I): 750 W
- Press the switch (II): 1250 W
- Press the switches (I+II): 2000 W
4.
Room temperature can be adjusted by means of the thermostat. Turn the
thermostat knob clockwise to increase the temperature or anticlockwise to
decrease it.
The lights on the power switches come on when the heater is running and the
thermostat has been activated.
V.8.0
20
5.
Once the desired temperature has been reached, slowly turn the thermostat
knob anticlockwise until you hear a "click". The indicator light(s) go(es) out. The
desired temperature will be kept constant by the thermostat function.
6.
When you have finished, return the switches to their initial position "0" and the
thermostat knob to "MIN" position, then unplug the radiator.
Note: The heater is equipped with an overheating protection system
Warning! Never cover or place any type of object on the radiator when in operation.
MAINTENANCE AND CLEANING
1.
Always unplug the appliance and keep it away from the socket before cleaning it.
2.
To clean the exterior surface of the appliance, use a slightly damp cloth. Then dry
it thoroughly with a soft, dry cloth before using it again.
3.
Do not use any detergents or chemicals. Do not use wax or shine products as they
may react to heat and cause discolouration.
4.
If you do not use the appliance for a certain period of time, make sure it is
unplugged from the socket, and put it in its package for easy storage and later
use. Clean your radiator as previously mentioned.
21
V.8.0

Publicité

loading