Maintenance; Service Information; Service And Repair - Alnor VELOMETER JR. Manuel Du Propriétaire

Handle the Velometer Jr.
composed of precision parts and is carefully balanced and calibrated.
If due to accident, the Velometer Jr.
return to manufacturer for factory quality service. Other instrument
laboratories may not have proper calibrating equipment.
A partially plugged orifice will result in a low reading and, therefore,
we suggest occasional cleaning of the orifice. A toothpick is a good
tool for this purpose. Do not use any wire or other hard tool for this
purpose.

Service and Repair

Please return your Product Registration Card immediately. This
allows us send you service reminders, special offers, and important
information about your product.
Before sending your instrument for calibration or repair, you should
call Customer Service. The Service Department will provide you with
the cost of service or calibration, Return Material Authorization (RMA)
number, and shipping instructions.
Please have the following information available when you call:
Owner's Name, address, and phone number
Billing address, if different and applicable
Instrument Name or Model
Serial Number
Date of Purchase
Where Purchased
TSI recommends that you keep a 'calibration log' and keep all
records of service on your instrument.

MAINTENANCE

®
Anemometer as you would a watch. It is

SERVICE INFORMATION

®
Anemometer requires repair,
3