ENG
E-Mat 100
The E-Mat 100 can be considered an expansion of Mat 100, since one can be
connected to the other by two small linking cables. Thus the magnetic field
produced by each channel of the Magnum device will be funneled on two mats
and will increase the treated surface significantly.
Connector to be
plugged in the Magnum
device
MAT 100
To connect the two mats:
Cables to connect E-Mat 100 to Mat 100
Velcro
Open the Mat 100 on the shorter side and pull out the
cable as shown in the picture
Unplug one of the two connectors closing the circuit
E-Mat 100