Dimplex Sierra 48 Mode D'emploi page 11

Specifications
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
Electrical
Voltage: 220V~240V 50Hz
Watts: 1 300~1 600 Watts
Amps: 6-7 A
Wiring: Plug-In
Bulb Type: LED
Dimensions
Sierra 48"
Width: 1046 mm
Height: 460 mm
Height with feet: 547 mm
Depth: 133 mm
Depth with feet: 279 mm
Weight: 18.5 kg
Sierra 60"
Width: 1318 mm
Height: 460 mm
Height with feet: 547 mm
Depth: 133 mm
Depth with feet: 279 mm
Weight: 28.9 kg
Sierra 72"
Width: 1626 mm
Height: 460 mm
Height with feet: 547 mm
Depth: 133 mm
Depth with feet: 279 mm
Weight: 35.3 kg
- 20 -
Installation
GROUNDING INSTRUCTIONS
• This product is equipped with a cord that has
grounding conductor and a grounding plug.
The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
• This heater is for use on 220-240 volts.
• A 13 Amp, 220-240 Volt circuit is required.
A dedicated circuit is preferred, but not essential
in all cases.
WARNING: Electrical outlet wiring must comply
with local building codes and other applicable regulations to reduce the risk of fire,
electric shock, or injury to persons.
WARNING: Do not attempt to wire your own new outlets or circuits. To reduce the
risk of fire, electric shock or injury to persons, always use a licensed electrician.
WARNING: Ensure that the circuit on which the fireplace is to be installed had the
power cut off at the service panel until installation is complete.
- 21 -
EN