TREND R/STAND/A Traduction Des Instructions Originales page 6

MAINTENANCE
Please use only Trend original spare parts and accessories. The accessory has been designed to
operate over a long period of time with minimum of maintenance. Continual satisfactory operation
depends upon proper tool care and regular cleaning.
Cleaning
• Regularly clean with a soft cloth.
• Keep the threads clear of resin build up.
Lubrication
• Your accessory requires no additional lubrication.
Storage
• Always return product to its original packaging.
Spare Parts
• See website for details.
TROUBLE SHOOTING
Fault
• The height adjuster is not
moving the roller up and down.
• Roller is stuck and not rolling.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as waste.
Packaging should be sorted for environmental-friendly recycling.
The product and its accessories at the end of its life should be sorted for environmental-friendly
recycling.
GUARANTEE
All Trend products guaranteed against any defects in either workmanship or material, except products
that have been damaged due to improper use or maintenance.
© Copyright 2019
No part of this publication may be reproduced, stored or transmitted in any form with prior permission.
Our policy of continuous improvement means that specifications may change without notice. Trend
Machinery & Cutting Tools Ltd. cannot be held liable for any material rendered unusable, or for any for
of consequential loss. E&OE.
R/STAND/A
Cause
• Something is obstructing the lower part of
the raising mechanism.
• Something is obstructing free movement of
the roller.
-4-
English
Remedy
• Ensure raising
mechanism is not
obstructed before
use.
• Ensure roller
movement is not
obstructed before
use.