TREND R/STAND/A Traduction Des Instructions Originales page 4

7. Check all fixing and fastening nuts, bolts and screws on power tool, attachment and cutting tools
are correctly assembled, tight and to correct torque setting before use.
8. Ensure all visors, guards and dust extraction is fitted.
9. The direction of routing must always be opposite to the cutter's direction of rotation.
10. Do not switch power tool on with the cutter touching the workpiece.
11. Trial cuts should be made in waste material before starting any project.
12. Repair of tools is only allowed according to tool manufacturers instructions.
13. Do not take deep cuts in one pass, take shallow passes to reduce the side load applied to
the cutter.
14. User must be competent in using woodworking equipment before using our product.
15. Consider working environment before using tools. Ensure working position is comfortable and
component is clamped securely. Keep proper footing and balance at all times.
16. Please see children and visitors away from tools and work area.
17. All tools have a residual risk so must therefore be handled with caution.
If you require further safety advice, technical information, or spare parts, please call Trend Technical
Support or visit www.trend-uk.com
ITEMS REQUIRED
• Mitre saw
• Hand tools
ITEMS ENCLOSED & DESCRIPTION OF PARTS
A Body
B Raising mechanism
C Height adjuster knob
D Roller
E Roller springs
F Screw holes for bench fixing
G Soft foot pads
E
B
F
A
R/STAND/A
D
G
-2-
English
E
C