Niko 16-678 Mode D'emploi page 94

16-678
EN
When starting up EasySetup, the file 'Default_EN' is always loaded.
4.2.2. Setting the COM port
When sending or receiving data, the EasySetup program can automatically find the
correct COM port of the pc to which the exchange is connected.
The COM port will be found automatically as a standard (Auto). You can also manually
select the COM port in the menu 'Extra'. The COM port of a detected exchange stays
the same during the whole session, unless you manually modify it.
4.2.3. Remote
The function remote enables to remotely configure the exchange. This function is not
designed for the end-user and is not further described here.
4.2.4. Select language
You can select a language in the menu 'Extra' under 'Select language'. This language
is the standard language of your pc. The program displays the welcome box in order
to make the necessary settings.
94