Télécharger Imprimer la page

Kalorik FT 43721 Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

LOCK position and the oil filter cover (11) is in place inside the oil
reservoir (9). Then, pour suitable cooking oil into the oil reservoir (9)
(ill. f).
Danger of burns!
Never refill the oil reservoir (9) during use or while hot. Always
allow the appliance to cool down completely. Do not mix new
oil with old oil.
WARNING:
DO NOT OVER OR UNDER FILL (ill. f). The minimum oil capacity is
1.9L (MIN), the maximum oil capacity is 3L (MAX). Ensure the oil
level always remains between the MIN and MAX marking (10).
Spread a little oil on the inside of the view window (2) to prevent
condensation.
Place the lid (3) onto the housing (13).
Ensure the temperature control knob (24) is on the 0 position before
attaching the magnetic plug (18) to the socket on the back side of
the control panel assembly (22) (ill. g).
NOTE:
The magnetic plug (18) is designed to only fit one way. Ensure
the side stating THIS SIDE UP is facing up and the magnetic plug
(18) is properly attached.
Insert the plug (17) into a wall outlet (ill. g).
WARNING:
Only use accessories recommended by the manufacturer. Do
not place any other materials in the appliance.
Never let the power cord (17) come in contact with the lid (3) or
appliance housing (13) during use (ill. h).
Danger of burns!
Do not touch the lid (3) or appliance housing (13) during or after
use (ill. i). Only use the handles (2, 7, 20) provided.
Always pay special attention when adding or removing
accessories and food from the appliance. Never touch the lid
(3) or appliance housing (13) when the appliance is plugged in
and switched on or immediately after use. It is recommended to
always use oven mitts.
www.KALORIK.com
11
FT 43721 - 200605

Publicité

loading