Publicité
Les langues disponibles
Les langues disponibles
bracket on the basket (6) and push the handle (7) backwards
(ill. a and b). Do not assemble any other way (ill. c).
the oil reservoir (9) is secured in the correct position with the oil
‒
filter cover (11) and oil valve (12) on the same side than the oil
filtration control knob (14) (ill. d). Ensure the oil filter cover (11) is
in place inside the oil reservoir (9).
the control panel assembly (22) is placed on the connecting
‒
plate on the back of the housing (13). Ensure the grooves of the
connecting plate are in the guides of the control panel
assembly (ill. e).
NOTE:
YOUR APPLIANCE IS EQUIPPED WITH A SAFETY SWITCH (5)
‒
LOCATED ON THE CONTROL PANEL ASSEMBLY (22). IF THE
CONTROL PANEL ASSEMBLY (22) IS NOT PLACED PROPERLY IN ITS
POSITION, THE APPLIANCE WILL NOT OPERATE.
Incorrect assembly may lead to an unstable setup and might
‒
cause injuries.
The silicon rubber sealing plate (23) prevents hot steam
‒
escaping from under the lid. Do not attempt to remove.
USING THE APPLIANCE
This appliance can be used for frying food such as French fries, chicken
or fish pieces (see Recommended frying times and temperatures).
NOTE:
The appliance has a rated power of 1700W. Before plugging it
‒
into the wall outlet, ensure that the electrical circuit is not
overloaded with other appliances. This appliance should always
be operated on a separate 120V ~ 60Hz wall outlet.
Make sure the appliance is switched off before connecting it to
‒
a wall outlet.
•
Place the appliance on a clean, flat and heat-resistant surface.
When using the appliance on wooden surfaces, use a heat resistant
mat to protect the wood from damages. Ensure a minimum
distance around the appliance of at least 4 inches to other objects,
cupboards and walls.
•
Ensure the oil container (15) is assembled, empty and in place
inside the appliance, the oil filtration control knob (14) is on the
www.KALORIK.com
10
FT 43721 - 200605
Publicité
