Wall Controller W/ Remote Control - HEATSTRIP Design THH1500AEU Manuel D'utilisation, D'installation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

R A D I A N T
O U T D O O R
H E A T E R S
Wall Controller with remote control
This controller is a custom designed and manufactured
®
controller for HEATSTRIP
. It has been designed for ease
of use to ensure economic running costs of your heater. It
provides a timer for automatic heater operation.
The timer function has four settings. It can turn the heater
on for 1 hour, 2 hours, 4 hours or constantly on.
The timer can be operated where it is installed or via
remote control unit. It has pre set timing for 1 hour, 2 hours
or hours or continuous, allowing the heater to operate
continuously.
The remote control has a range of 10 metres and must be
within line of sight of the wall switch.
Controlling multiple units
It is possible to use one wall controller to control multiple heaters up to 16 Amps load. The wall controller is rated at 16
Amps and 220-240 volts. For larger current draw, it is recommended that you talk to your electrician who can use a
relay to connect more units.
Mounting
The TT-MTR is designed to fit into a standard European wall gangbox. It will just as easily fit into a plaster wall. Your
electrician can install this device.
The controller needs to be installed according to your local wiring guidelines.
Operation
Press "ON/OFF" button to turn power on and off.
Press "TIMER" button to set timer to 1, 2, 4 hours operation. The timer indicator light will show which time setting is
selected. The timer will start the heater and automatically turn it off at the preselected time.
Safety
The TT-MTR controller must be installed in a dry location. It is not suitable for installation where rain or water could
affect the unit..
Ensure the connections are properly connected.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or intellectual
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play
with the appliance.
Maintenance
The TT-MTR Controller is made from durable materials, however regular care and maintenance of your controller will
help prolong the life of the product.
It is recommended that you dust the controller to keep the surface clean. The cleaning process at least every three
months will reduce the amount of build up and keep it looking as best it can.
Do not use any abrasive materials or products to clean the controller, this includes solvents, citrus based cleaners or
other harsh cleaning products. Do not use water or a damp cloth to clean the controller.
When handling the controller, ensure that your hands are clean or that you use clean gloves as grease or dirt can mark
the surface of the controller.
MODEL
MAXIMUM
MAXIMUM
PACKAGED
WEIGHT (kg)
VOLTAGE (Volts)
CURRENT (Amps)
DIMENSIONS (mm)
TT-MTR
220—240
16
80 x 80 x 42
0.5
23

Publicité

Table des Matières
loading

Table des Matières