Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Pole / beam mounting kit
20 MINIMUM
BEAM or POLE
175 MAXIMUM
20 MINIMUM
POLE
Screws for connection to the beam or pole are not included.
Minimum pole diameter 20mm.
Maximum pole diameter 70mm.
This mounting option is suitable for umbrella struts.
The beam/pole can be placed directly on top of the mounting
bracket. No clearance is required from the top bracket to the
bottom of beam/pole
.
PART No
DIMENSIONS (mm)
THHAC-001
18
R A D I A N T
BEAM or POLE
SCREWS
(NOT INCLUDED)
POLE/BEAM MOUNTING BRACKET
HEATER
OFFSET MOUNT
SCREWS
(NOT INCLUDED)
POLE/BEAM MOUNTING BRACKET
HEATER
NARROW CENTERED MOUNT
BEAM or POLE
SCREWS
(NOT INCLUDED)
POLE/BEAM MOUNTING BRACKET
HEATER
WIDE CENTERED MOUNT
BEAM or POLE
POLE/BEAM MOUNTING BRACKET
HEATER
TRANSVERSE MOUNTED
NUT & BOLT (NOT INCLUDED)
POLE/BEAM MOUNTING BRACKET
HEATER
NARROW CENTERED MOUNT
PACKAGED
150 x 150 x 50
O U T D O O R
The optional Pole/Beam mounting bracket kit can
be used to mount HEATSTRIP
wooden beams, rafters, poles, umbrellas struts
etc.
MATERIALS
WEIGHT
(kg)
0.5
316 SS
H E A T E R S
®
Design onto
5mm HARDWARE
70mm Maximum
Publicité
Table des Matières
