Unpacking And Checking The Package Contents; Preparation; Choosing The Location; Description - Steinbach SPS 50-1T Notice Originale

Improper handling of the device can damage the device.
- Select a location for the device that is protected from the weather.
- Ensure sufficient air exchange to prevent overheating of the motor.
- Do not let the device run dry (without water).
- Never place the device or parts of it in the pool.

Unpacking and checking the package contents

Packaging materials pose a risk of suffocation!
Catching your head in the packaging foil or swallowing other packaging materials can cause
death. There is a higher risk for children and mentally challenged persons who cannot
estimate the hazard potential due to lack of knowledge and experience.
- Prevent children and mentally challenged persons from playing with the packaging
materials.

Preparation

Choosing the location

The pump is sufficiently protected against water and foreign objects entering the pump.
However, a location that is protected from severe weather influences also reduces dirt
build-up and wear.
The following requirements must be met or considered:
- Position the pump between the suction connection and the injection nozzle with sufficient distance
to the pool wall so that the pump cannot be used to climb into the pool.
- Position the pump below the water level.
- The maximum distance to the pool is 3 m (8 ft.).
- The surface, for example a concrete slab, must be stable, sturdy and horizontal.

Description

Description of the filter pump

The filter pump pumps the pool water from the pool to the filter system.
An integrated prefilter prevents coarse dirt particles from entering the pump. This protects the pump
from damage.

Function principle of the timer

With the integrated timer, you can start and stop the pump automatically once a day for the set time. To
set several intervals within a 24-hour period, you need an external timer.
The timer has a battery (see section "Technical data"). The start time and the running time are saved in
case the power supply is interrupted or fails altogether.

Filtering time

The pool's water content should be circulated at least twice in a 24 h period. In case of heavier
frequency, the pool water should be circulated 3 to 5 times per day.
NOTICE!
WARNING!
23