LaserLiner VarioView Camera Mode D'emploi page 5

Completely read through the operating instructions, the "Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
Function / Application
The VarioView Camera is a camera unit for connection to the base VideoFlex unit. When combined with
the base unit, colour video images are sent to the LCD for inspecting highly inaccessible locations such
as cavities, shafts, masonry or in vehicles.
General safety instructions
– The device must only be used in accordance with its intended purpose and within the scope of
the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– The camera head is not acid-resistant or fireproof.
– It is absolutely vital to ensure that the VarioView Camera does not come into contact with
chemicals, voltage, moving or hot objects. This can damage the device and put its user at risk of
serious injury.
– The VarioView Camera must not be used for medical examinations / examining people.
– Please ensure compliance with the safety regulations set out by local and national authorities with
regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
Safety instructions
Using artificial, optical emission (OStrV)
LED outlet
– The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance with the latest versions of
applicable standards relating to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable conditions, the accessible radiation
of the LEDs is safe for the human eye and skin.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limit values in
accordance with EMC-Directive 2014/30/EU.
VarioView Camera
05
EN