Installation - Furrion FGH4ZSA-SS Instructions Pour L'installation Et L'emploi

Installation

The appliance must be installed only by a qualified person in compliance with the
instructions provided and NFPA 11.92.
Please ensure to install this product per manufacturers instructions to avoid harm to
persons, animals or damage property.
Important: Please ensure the battery or power supply has been removed before any
adjustments or maintenance work is completed.
What's in the box
Make sure you have all the items in the packaging as listed below. For missing item(s),
contact your dealer.
• Single stainless steel gas cooker unit
battery • User manual
Installation for Cooktop (without Oven)
• Make the cut-out in the countertop per figure (Fig. A)
• Install the gas supply hose with 5/8-18UNF connection and shut off valve to the
back wall on the left hand side of the cooktop cut out
• Ensure to leave enough hose length so the cooktop can be fitted and removed.
• Ensure there is ventilation hole for air circulation around the cooktop in the cabinet.
• The depth of cabinets installed above
cooking top should not exceed 13 in (330
mm).
• Ensure the countertop, surrounding
materials and bonding agents have
a temperature rating of no less than
193˚F (95˚C) to avoid deformation or
discoloration.
• Before fitting the cooktop to the cavity
affix the roll of sealing putty (included
in the cooktop packaging) around the
underside edge. Once putty is installed
completely around the underside,
remove the putty protective film and then fit the cooktop in cut out. Push down on
the cooktop edges to seal and fix the appliance securely.
10
•
• Warranty card
Gas hose • Slicone pad
.
1
• 1 AA
Fig. A