Note
When carrying, the lens hood can be attached in the
0
reverse direction.
1
Align mark B (
) on the lens hood with the mark
on the tip of the lens.
2
Attach the lens hood by rotating it in the direction of
the arrow until it clicks.
It is recommended to remove the lens hood during
0
flash photography as the lens hood can block the light
from the flash.
To prevent dropping of the lens, you should never carry
0
the lens by just holding the lens hood.
22
DVQX2223
(ENG)
∫ Notes on filter use
It is possible to attach the lens cap or the lens hood
0
with the filter already attached.
There may be some vignetting in recorded images if
0
multiple filters are attached simultaneously.
It is not possible to attach any items other than filters
0
such as a conversion lens or adaptor to the front of the
lens and use it in combination with this lens.
Lens damage may result if such items are attached.