Publicité
POWR
È
É
È
a
b
É
a
b
REDUCTION DRIVE GEAR
3. Install:
• Collar
• Rear bearing
NOTE:
• Install the front bearing using a press.
• Before installing the rear bearing, hold both
the inner and outer races of the front bearing
in place as shown with a pipe that is at least
40 mm (1.57 in) long and has an outer diam-
eter of 70 mm (2.76 in) and an inner diame-
ter of 30 mm (1.18 in).
Driver rod LS:
90890-06606
Outer race installer—forward
gear:
YB-06085
Bearing outer race attachment:
90890-06624
È For USA and Canada
É For worldwide
4. Install:
• Oil seals
Driver handle—large:
YB-06071
Driver rod LS:
90890-06606
Outer race installer—forward
gear:
YB-06085
Bearing outer race attachment:
90890-06624
È For USA and Canada
É For worldwide
Distance a:
17.9 ± 0.2 mm (0.70 ± 0.01 in)
Distance b:
9.3 ± 0.2 mm (0.37 ± 0.01 in)
5-39
E
Publicité
Chapitres
