BGS technic 62676 Mode D'emploi page 5

TOOLS
1 Base plate, to be used as BMW OEM 130320
2 Base plate, to be used as BMW OEM 130270
3
Base plate, to be used as BMW OEM 2249115
4 Draw bolt, can be used with tool 8 and 12
5 Sliding handle, can be used with tool 10 and 11
6 Fastening screw
7
Fastening screw
8
Pulling claw, to be used as BMW OEM 130180
9 Draw bolt, can be used with tool 1, 2 and 3
10 Pulling claw, to be used as Mercedes Benz OEM 271589023300
11 Pulling claw, to be used as Mercedes Benz OEM 278589003300
12 Sliding hammer weight, can be used with tool 4 and 8
13 Fastening screw
14 Fastening screw
15 Spacer sleeve
16 Spacer sleeve
17 Spacer sleeve
18 Seal ring mounting tool, Ø 10.5 mm, to be used as BMW OEM 130195
19 Seal ring mounting tool, Ø 12.5 mm, to be used as BMW OEM 130195
UNPACKING
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Petrol Injection Nozzle Tool Set,
for BMW and Mercedes
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 62676
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed