BH bikes Easy motion Manuel page 36

EN
USER MANUAL
WARNING
NOTE
3. Pedal Assistance Mode Selection.
The system has 5 pedal assistance modes:
100% or BOOST
70% or SPORT
50% or ECO +
30% or ECO
0% or NO ASSIST
To toggle through the assistance modes, the user must press the (+) button to increase the level
of assistance and the (-) button to reduce the level of assistance.
0
77
72%
KM
Range
No Assist
Assistance Mode
NOTE
36
After turning the system on, make sure that you do not start riding without
checking the assistance mode. By default, it starts with the assistance mode
selected before it was last switched off.
Wait 3 seconds after turning on the system before you start applying pressure
on the pedals. During this 3-second period, the assistance system is starting
up and calibrating the torque sensor. Otherwise, if you press the pedal
beforehand, this may weaken assistance and error 14 may even be displayed
on the screen (see Troubleshooting section). To fix this, you should reboot
the system without applying pressure on the pedals for a period of 3 seconds.
Identified with Red. Use when you want to get maximum power from the system.
Identified with Orange. Use when climbing difficult terrains.
Identified with Blue. Use when you want a more comfortable ride,
e.g. when climbing a steep hill.
Identified with Green. Use when you want to travel as far as possible.
Identified with Black. Use when you want to travel without assisted power.
You can continue to use the other functions of the display panel.
0
KM/H KM/H
76
72% 72%
KM
Range
Eco
Assistance Mode
During a journey, selecting suitable assistance modes for the terrain
and pedalling conditions that you encounter will ensure the best balance
between battery economy and pedalling comfort.
0 0
KM/H
76 75
72%
KM KM
Range Range
Eco+ Sport
Assistance Mode
Assistance Mode
0
KM/H
KM/H
Boost
72%
Assistance Mode
In Boost mode the range
information disappears.
ATOM