Overheating Protection & Reset; Design And Function; Overview - CASO DESIGN HW 660 Mode D'emploi

12.7 Overheating protection & reset
Please use enclosed reset-key for the reset-button.

13 Design and Function

In this chapter, you'll find important information on the design and function of the device.

13.1 Overview

► Warning symbol: hot steam.
► Caution hot steam can escape at device. Risk of burns.
The device is equipped with an overheating
protection facility. If the temperature of the
device exceeds the critical limit the device shuts
off further power supply for safety reasons.
By pressing the reset button (1) the device can
be reactivated.
Unplug the device before reset. When the
device is only producing cold water please press
reset button.
Warning
1 control panel
2 tank cover
3 tank
4 drip tray
5 main body
6 spout
Please note
► Please note that the dispensed
water (at all temperature settings)
is not boiled before. Therefore,
especially when preparing baby
food, we recommend to boil the
water first, cool it down to room
temperature and then pour it into
the water tank of the device.
34