Honda HF1211 Manuel D'utilisation page 17

WORK
1. MACHINE
1.1 Check of tight fixing and
sharpness of blade
1.2 Blade replacement
1.3 Check of the
1)
transmission belt
1.4 Transmission belt
1)
replacement
1.5 Checking the
blade drive belt 1)
1.6 Blade drive belt
replacement 1)
1.7 Check and adjustment
of brake
1.8 Check and adjustment
of drive
1.9 Check blade
engagement and brake
1.10 Check of tight fixing
of all the elements
1) 2)
1.11 General lubrication
2. ENGINE
3)
2.1 Check oil level
2.2 Engine oil change 4)
2.3 Oil filter replacement 4)
3)
2.4 Check and cleaning
5) 6)
of air filter
6)
2.5 Air filter replacement
1)
2.6 Check fuel filter
2.7 Fuel filter replacement 1)
2.8 Check and cleaning
of spark plug points
2.9 Replacement of spark
plug
1) Contact your Dealer.
General lubrication should be carried out whenever the machine
2)
is to be left unused for a long period.
3) Check each time used.
4) Operation to be performed also after the first 20 hours of opera-
tion.
5) Carry out maintenance of the air filter more frequently in the ca-
se of use on dusty ground.
6) Replace the paper element only.
LAYING ON ITS SIDE
In order to easily reach beneath the machine, it can be turned onto
its side after having removed the grass-catcher and completely
emptied the fuel tank.
This operation is to be performed with the
WARNING!
as sistance of another person.
HOURS DATE OR N° OF HOURS
25
100
25
–
25
–
10
10
10
25
25
–
100
–
50
200
200
–
100
200
Having put the machine onto a firm
and flat surface, engage the parking
brake, put the cutting deck into posi-
tion «7», firmly grip the steering wheel
and the seat, and turn the machine
onto its right hand side so that it rests
on the grass-catcher (as shown), ta -
king care not to damage plastic parts.
Make sure that
WARNING!
the machine is stable before
starting any work and do not car -
ry out work that may cause it to
fall.
17 EN