Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – Industrial WaveLinx Integrated Sensor
Sensor Maintenance
Sensor Replacement
1.
Rotate sensor counter clockwise. (Figure 1.)
Figure 1.
2.
Remove sensor from receptacle. (Figure 2.)
Figure 2.
3.
To install, insert sensor and rotate clockwise until
detent felt. (Figure 3.)
Figure 3.
2
COOPER LIGHTING SOLUTIONS
Turn Counter Clockwise
Turn Clockwise
IB507018EN
Installation instructions
Occupancy Mask Replacement
1.
Locate slot on sensor. (Figure 4.)
Use Slot to
Remove Top
Figure 4.
2.
Use tool in slot to remove sensor cap. (Figure 5.)
Figure 5.
3.
Place mask over lens and reinstall sensor cap using the
slots for alignment. (Figure 6.)
Place Mask Over
PIR Lens
Figure 6.
Line up Slots
to Reinstall
Publicité
