Troubleshooting - Marshalltown LWFS13 Mode D'emploi

Shear won't cut desired material
Shear is leaving a jagged edge on flooring
Shear requires more force to cut than normal
WS2690
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com

TROUBLESHOOTING

ISSUE RESOLUTION
Review cutting guide in manual to confirm it is a
confirmed material. Contact MARSHALLTOWN
customer service. Do not attempt to use
extreme force to cut the material.
Use honing stone to carefully touch up the blade
as described in the manual. Use double cutting
method as described in the manual if necessary.
Use honing stone to carefully touch up the
blade as described in the manual. Follow the
maintenance section of the manual to oil and
grease the shear.
11 of 12