Mitsubishi Electric MAC-100FT-E Notice D'utilisation Et Manuel D'installation page 4

Contents
1. Safety precautions . ........................................................................................................................................................1
2. Product Introduction ......................................................................................................................................................5
3. Parts . ..............................................................................................................................................................................7
4. Connecting the Plasma Quad Connect.........................................................................................................................8
5. Specifications ..............................................................................................................................................................12
About Plasma Quad Connect
en
● Some room air conditioners cannot be attached to the Plasma Quad Connect.
Please make sure the room air conditioner can be used before attempting to attach it.
1. Safety precautions
● Read all Safety Instructions before using this device.
● This manual contains important safety information.
Be sure to comply with the instructions.
[Precautions for installation]
(Improper handling may have serious consequences, including serious injury or death.)
■ End user should not install the Plasma Quad
Connect, it is designed for Professional installation
only.
Improper installation may result in fire, electric shock, or
damage/water leaks if the Plasma Quad Connect unit
falls. Consult the dealer from whom you purchased the
unit or professional installer.
■ The Plasma Quad Connect should be securely in-
stalled in accordance with the enclosed Installation
Instructions.
Improper installation may result in fire, electric shock, or
damage if the Plasma Quad Connect unit falls.
■ The unit should be mounted in a location that can
support its weight.
If installed in an area that cannot support the unit,
the Plasma Quad Connect unit could fall and cause
damage.
■ Mount so that an external force and stresses are not
transmitted to the terminal connection by the wiring.
Improper connection and mounting may result in break-
ing, heat generation, smoke generation, or fire.
■ Securely attach the cover to the Plasma Quad
Connect unit.
If the cover of the Plasma Quad Connect unit is not se-
curely attached, dust or water penetration could occur,
resulting in a fire or electric shock.
EN-1
● After installing the Plasma Quad Connect, provide this
Installation Manual to the user. Instruct users to store it
with their room air conditioner Instruction Manual and
Warranty in a safe location.
Warning
■ The Plasma Quad Connect unit should be connect-
ed to power supply of the correct rating.
Connecting greater than the rated voltage may result in
damage or fire.
■ Mitsubishi components or other designated compo-
nents must be used for installation.
Improper component may result in fire, electric shock,
or damage/water leaks if the Plasma Quad Connect unit
falls.
■ Electric work must be performed by a qualified
electrical engineer and/or authorized personnel ac-
cording to the local regulations and the instructions
detailed in the installation manual.
Inadequate circuit capacity or improper installation may
result in electric shock or fire.
■ This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety.
■ This appliance shall be installed in accordance with
national wiring regulations.
■ If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.