Before Installation; Included Parts; Installation Procedure - Toto TB960S Manuel D'installation Et D'utilisation

„ Observe all local plumbing codes.
„ Make sure the water supply is shut off.
„ Read these instructions carefully to ensure proper installation.
„ TOTO reserves the right to update product design without notice.
Check to make sure you have the following parts indicated below:
Spout Unit
1 piece
or
Diverter:
Knob - (TB960S)
Handle - (TB960S1)
1 piece
Installing the Spout
NOTE: Finish the deck and
make sure the water supply is
turned off before you begin.
1. Remove the plug from the
spout shank.
2. Loosen setscrew on the
back of the spout and
remove spout connector.
CAUTION: If setscrew is not
loosened, it can damage
o-ring.
3. Thread the spout connector
onto the spout shank nut.
4. Carefully insert the spout
onto the spout connector.
CAUTION: Take care not to
damage o-ring.
5. Secure the spout with
setscrew.

BEFORE INSTALLATION

INCLUDED PARTS

Hot & Cold Lever
Handle
1 piece each
Decorative ring
1 piece

INSTALLATION PROCEDURE

Spout connector
Decorative cap
3 pieces
Hex wrenches
1 piece each
Spout
Spout shank
Nut
3
Handshower
hose w/ Flex
1 piece
Setscrew
Plug
(remove)