Publicité
Les langues disponibles
Les langues disponibles
Winch Installation
Correct installation of your Winch is required for proper operation. Installation should be on a flat surface
following the bolt pattern shown in FIGURE 1.
Read and follow directions carefully to ensure proper Winch alignment and trouble free operation.
This Winch MUST be mounted with the rope in the under-wind direction (FIGURE 8).
MUST use only genuine Keeper Winch replacement Wire Rope part number KWA14520 or Synthetic Rope part
number KVA10041S.
!
WARNING
Improper mounting could damage your Winch
and void your warranty.
!
WARNING
DO NOT EXCEED THE RATING OF YOUR RECIEVER HITCH
Step 1 Mount the Winch to the mounting kit base plate, proper mounting bolts are supplied. If using the Roller
Fairlead or Hawse Fairlead included, install now to mounting plate. You may need to remove one or more of
the rollers on the roller fairlead to pass through the wire rope. After doing this you may now attach the clevis
hook. See (Figure 8) for order and bolt direction.
FIGURE 8
Mounting Plate
4-Way
Roller Fairlead
THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
!
!
Wire Rope or Synthetic Rope
Under-wind Direction
Does not include Mounting Plate (KWA14622)
Aluminum Hawse
Fairlead
7
Publicité
