Storage Rack Assembly & Mounting - RIDGID VAC50000 Mode D'emploi

SP6947 RIDGID 5 Gallon ESF_SP6947 3/11/15 9:49 AM Page 5
Storage Rack Assembly & Mounting
Assembling Upper and Lower
Rack
Align the tabs in the upper rack with
notches in lower rack. Slide upper rack
forward until the hooks on the lower rack
engages the bottom flange of the upper
rack. You will hear an audible click when
the locks engage.
Mounting Storage Rack to Wall
injury:
• Do not mount storage rack over 5
feet from the ground.
• Do not attach screws to drywall
only.
• Do not sit or hang on storage
rack.
• Do not exceed maximum weight
limit of 40 pounds on storage
rack.
Tab of
1. Choose a location that is indoors and
Upper
not exposed to rain. For best
Rack
performance and easy access, position
Notch of
the storage rack so the center of the
Lower
vacuum inlet port is no more that five
Rack
feet from floor and no more than
eighteen feet from an electrical outlet.
Upper
Rack
Lower
Rack
Vacuum Inlet
Port
5
WARNING: To reduce the risk of
Floor
5 Feet
Maximum