Product Overview; Using The Machine - Hornbach FQ-ARM 4047 BASIC Mode D'emploi

Product overview

1 Handle
2 On/ off trigger
3 Safety button
4
Upper locking lever
5
Collection bag
6 Lower locking lever
7 Height adjustment lever
8 Side flap
9 Cutting blade
10 Main handle
11 Wheel
12 Battery cover
13 Back flap
14 Lower handle
15 Upper handle
LOWER HANDLE
1
Move the lower handle 14 to an
upright position and close the
lower locking lever 6.
Warning! Never use the machine with open locking levers.
EN
102

Using the machine

Warning! Before start using
the machine,
blades and fastening elements for
damage. Do not use the machine
if it is damaged.
1. The machine is equipped with a
safety switch. In order to switch
the machine on, press and hold
the safety button 3, tilt the ma-
chine backwards, pull the on/off
trigger 2 and release the safety
button 3.
2. Keeping the on/off trigger 2
pulled, wait until the machine has
reached full speed.
3. Place both hands on the handle 1,
return the machine back to the
ground. Press the on/off trigger 2
towarts the handle 1 and slowly
start pushing the machine for-
ward.
4. Start mowing in parallel lines. For
a better result, repeat the process
in a 90° angle.
5. To switch the machine off, release
the on/off trigger 2. Wait until the
blade has come to a complete
stop before proceeding with fur-
ther actions.
UPPER HANDLE
2
Install the upper handle 15 to the
lower handle 14 as shown, using
the upper locking handle 4 as-
sembly.
check the