Siemens SITRANS F M MAGFLO Instructions page 2

® ® ® ® ®
SITRANS F M MAGFLO
800 32 606 757
900 36 653 804
1000 40 704 906
1100 44 755 906
1200 48 810 961
1400 56 925 1076
1500 50 972 1123
1600 64 1025 1176
1800 72 1123 1274
2000 78 1223 1374
1
) 13 mm shorter with AISI terminal box (Ex and high temperature)
2
) When earthing flanges are used, the thickness of the earthing flange must be added to the built-in length
3
) T = Type C grounding ring
C
4
) Weights are approx. and for PN 16 without transmitter
D = Outside diameter of flange, see flange tables
Installation, general
2
Electromagnetic flowmeter type MAG 3100
560 939 1000 -
630 1042 1125 -
670 1146 1250 -
770 1248 1375 -
792 1348 1500 -
1000 1675 1750 -
1020 1672 - -
1130 1915 2000 -
1250 1974 2250 -
1375 2174 2500 -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- 1000 1000
- 1125 1125
- 1250 1250
- - -
- 1500 1500
- - -
- 1875 1875
- - -
- - -
- - -
Reading and operating the flowmeter is pos-
sible under almost any installation condi-
tions because the display can be oriented in
relation to the sensor. To ensure optimum
flow measurement attention should be paid
to the following:
The sensor must always be completely full
with liquid.
Therefore avoid:
• Installation at the highest point in the pipe
system
• Installation in vertical pipes with free outlet
For partially filled pipes or pipes with down-
ward flow and free outlet the flowmeter should
be located in a U-tube.
2.0 475
2.0 560
2.0 700
2.0 1200
2.0 1250
3.0 1753
3.0 2600
3.0 2341
3.0 3253
3.0 4060